Get Some Helpful Tips For How To Fix Uneven Stain On Hardwood Floors

Everyone has that one room in their home where they can’t seem to keep the floor clean for more than a few days. Mine is my kitchen, and I’ve been struggling with how to fix uneven stain on hardwood floors. Well, today, I’m going to share some helpful tips from someone who has been there before you! 

It’s all about knowing your options and making an informed decision – if you’re looking for something quick and easy, then this might not be the blog post for you. However, if you want information that will help solve your problem long-term, read on below because I’ve got it here!

How To Fix Uneven Stain On Hardwood Floors

If your floors look blotchy or uneven, it’s most likely because of a poor application technique. Most wood surfaces require more than one coat for an even finish. So if you notice this problem with stains on unfinished cabinets and floorboards, try sanding in between coats until the color is perfect and the sanding must be consistent.

We’ll go over which tools you need to use and how to carry out the project on four different methods as follows.

Apply Sanding for The Affected Area


  • Paint roller
  • A container for water with sprinkler head
  • Paintbrush
  • Floor buffer
  • Microfiber mop
  • Dust mask

How To Do It?

1. If you want to apply wood stain on the floor but see some imperfections, you can consider sanding those areas as the first step but try to be gentle with it. You don’t want an irregular surface.

2. You should dry the previous coat before sanding when you want to remove a stain from wood floors. If there are still wet spots on your floorboards, leave them for an hour or two, so they can be completely dry. That will help to avoid the stain getting worse in the wood and damaging your floor.

3. As soon as you are sanding, put 180 to 220 grit sandpaper on the orbital sander and work from side to side carefully during following the grain. When the outlooking of the floor looks fine, then use microfiber mops to clean wood chips completely.

4. When your hardwood floor looks completely clean, you should polish it with a 3″ paintbrush, and then you can use the long-handled roller to appeal to stain across different areas on top. Make sure that when applying this product over older stains or floors of any kind, use more than three coats so that they can blend in perfectly.

5. Don’t rush; let each coat sit for 3 hours before continuously applying another layer on top of it. After the whole project, let your tile alone for around one week for even drying and durability.

Put An Additional Layer Of Stain


  • Polyurethane sealer
  • Stain
  • Mineral spirit or acetone
  • 180 grit sandpaper
  • Vacuum
  • Floor buffer
  • Rags
  • Dust mask

How To Do It?

1. Clean the dark areas with mineral spirits or acetone so that the stain is lifted from your wood.

2. For areas with tough stains, start by lightly sanding the area using 180-grit paper. That will wear away at any build-up on your floor and make it easier for cleaners or vacuum bots in the future.

3. Stain the surface again and let it dry in two days.

4. You can tell if your floor is ready for the next step by examining it. If there are dark stains in areas that don’t match, seal them up with some stain and let them dry before moving on.

5. Repeat the process several times to ensure the area can even match with the surrounding hardwood floor.

6. If this quick method couldn’t fix your issue, go on and grab essential equipment and materials for a makeover project. If possible, consider getting rid of it in whole with some quick techniques like lightening stains on blotchy areas.

However, if there is an issue with color change (like too dark), we recommend going for a total redo. You will have to sand down the current finish, get rid of the dust, then apply stain and wood conditioner on your floor.

To Fix Sticky Wood Stain, Consider To Apply More Stain


  • Mineral spirits or acetone
  • Sandpaper: 180-grit
  • Rags
  • Stain
  • Polyurethane sealer
  • Dust mask
  • Vacuum
  • Floor buffer
  • Wood Conditioner

How To Do It?

In some situations, Fixing the affected areas might be unhelpful, leaving you with the only option, which is re-applying for another coat.

1. You should apply the first cover of wood stain to the floor and then a second one. Do it quickly while still wet, or else there may be some inconsistencies in color due to different drying rates at various points on your floor’s surface.

2. Clean any excess paint by wiping it off to allow the wood stain to soak in and make a more even appearance.

Using Thinner To Even Out Wood Stain

To tackle tough stains like those pesky wood floors, pour a small amount of thinner on an old cloth and wipe away and focus more attention on dark areas. 

Always check your rag for any leftover spills before putting them on your floor; you don’t want to mess up your project. This way, we’re sure everything worked perfectly while cleaning the floor with the unnoticeable stain.

Tips To Fix Uneven Stain On Hardwood Floors

Here are a few tips below you don’t want to miss for a DIY task. However, the task comes with the responsibility of precautions:

  • To scratch off all lumps, dried paint, and varnishes, you should grab a paint scraper and take an observatory tour of the space to identify any holes in need of filling and any nails you need to pluck off.
  • After thoroughly cleaning the floor, remove all furniture and cover sockets to avoid damage during sanding.
  • You can remove doors to have a more smooth job without it interrupting you.
  • For your safety, make sure you protect vulnerable body parts by wearing a helmet or ear protection.
  • Because hardwood is a natural choice for those who want to make their house feel more personal, the dark colors would be a wise option as they compliment this sturdy material. An all-rich ebony color staining can also help cover up small or huge stains or marks that may be present on the surface of your flooring.
Don’t forget to use protective gear!


So, how to fix uneven stain on hardwood floors? The first thing you want to do is evaluate how bad the stain is. If it’s only a small spot, try some of these tips and tricks for cleaning up your flooring. Still, if the stains are more than just one area, as I mentioned, you will have to redo the whole floor. 

If you’re not confident enough in your skill, I recommend contacting a professional as soon as possible so they can examine what needs to be done about those pesky spots on hardwood floors!

Leave a Comment